Products (17)

For use with M2 Volt Stage circuit board and harness, following Volt 3 conversion.  Includes 15mm bar mount and stubby rods 13TPI.  *Requires some technical ability to install circuit board,...

Counter Weights for the Steadicam Volt Drive Unit Original Counter Weight is 100g Extender Counter Weight is 50g  Fixing Screw 1/4-20 x 1"

Steadicam Volt interconnect data cable. Connects the Volt Control box, to the gimbal drive unit. Made with extra soft and flexible woven sheath. Available in 2 lengths.  28" / 71cm...

Steadicam Volt Power Cable, with flexible braided sheath. 10"/25cm Supplied with 3pin right angled 0b lemo to choice of sled connectors:  Please choose: 817-0131 - Right Angled 3pin 0b Lemo...

817-7945 - Volt Control Box Rod Mount 60mm x 15mm For mounting the external Volt Control Box to 15mm bars. Fixes to either end or the top of the Volt...

Replacement belt for the Steadicam Volt drive unit. De-tension the relevant drive motor prior to installing. Do not over tighten. The belt should be able to be twisted 45 deg...

Replacement self adhesive tape pads for the Volt Encoder Ring.  1x Supplied. - Requires x4 for the encoder ring.  (Encoder ring not included) Suitable for all external Volt Encoder Rings (not...

All new, re-designed pulley wheel for the Steadicam Volt enabled gimbal. Reinforced and lower profile side walls. Suitable for Volt Conversions on the following gimbals: Shadow Ultra2 Archer2 GPI Pro...