Excellent for Slow Dolly-Like Push-Ins and Pull-Outs

The Volt 3 simulates the inertia of a heavily built payload or antlers— meaning push-ins and pull-outs feel smooth, weighted, and deliberate. It provides real tactile resistance to the operator AND the ability to remove that resistance with zero delay mid shot with presets, making slow, steady moves easier to control and more cinematic.

Benefit: Achieve fluid, dolly-style camera movement in tight spaces and dynamic environments, without the setup time or adding weight.

Improved Operation in Wind and Challenging environments

One of the Volt 3’s standout features is its active stabilization of the pan axis, which prevents the rig from unintentionally drifting due to wind or environmental forces. Unlike traditional setups where a gust can slightly turn the sled, the Volt 3 adds resistance with electronic precision, letting the operator stay on target — even in unpredictable outdoor conditions while maintaining control.

Benefit: Keep your frame rock-solid and consistent in any weather, with no unwanted panning caused by the elements.

Smooth While Running with the Rig

High-speed moves — like following a subject at a run — push any stabilizer to its limits. But with the Volt 3’s pan control and virtual inertia, the rig stays in the direction while absorbing motion, allowing the operator to run freely without fighting against sway or slop.

Benefit: Capture fast-moving action with sharp, steady tracking shots that retain the immersive feel of real movement.

Snappy, Accurate Whip Pans

The Volt 3 provides controlled resistance making fast pans not just possible — but repeatable and sharp. The pan axis drag helps prevent over-rotation and softens stops for professional, stylized transitions.

Benefit: Add visual punch and energy to your shots with whip pans that feel instinctive and polished.

What's new:

• Seamless and exclusive integration with Steadicam M-series systems
• Faster Set-Up and Power On
• Pan, Tilt, Roll, with damping, Inertia and Dynamic Braking
• Customizable Operator scene presets
• Center Post Compatibility: 1.58" and 1.75"
• All new Architecture
• All new VOLT 3 powered Gimbal featuring Pan Control with Inertia and Drag adjustments
• Digital Readout
• All of the original Volt features, now with the ultimate control over the Pan Axis
• Even faster Low Mode calibration

Upgrading your M2 Sled to Volt 3

What's in the package:

M2 upgrade kit comes with the all new Volt 3 powered Gimbal, Stage board, and control systems. The upgrade needs installing by your official Steadicam Reseller. It is not available for self install.

Email our United States Sales Team